home *** CD-ROM | disk | FTP | other *** search
- Korg WaveStation Wave Sequence
- ------------------------------
-
- * Load the WaveStation Wave Sequence
- settings
-
- * Use 'Pch #' to select the source of
- the Wave Sequence
-
- RAM1 (0) - load the RAM1 bank
- RAM2 (1) - load the RAM2 bank
- ROM1 (2) - load the ROM1 bank (not SR)
- ROM11(2) - load the ROM11 from SR
- CARD (3) - load the CARD bank
- RAM3 (4) - load RAM3 bank (EX, AD, SR)
- ROM4 (5) - SR only - load ROM4 bank
- ROM5 (6) - SR only - load ROM5 bank
- ROM6 (7) - SR only - load ROM6 bank
- ROM7 (8) - SR only - load ROM7 bank
- ROM8 (9) - SR only - load ROM8 bank
- ROM9 (10)- SR only - load ROM9 bank
- ROM10(11)- SR only - load ROM10 bank
-
- * FOR PROPER SOFTWARE OPERATION,
- REMOVE ALL DRIVERS NOT ASSOCIATED
- WITH YOUR WAVESTATION.
- EG. if you have a Wavestation,
- remove all drivers marked A/D or SR
- EG. if you have an SR, remove all
- drivers marked A/D and drivers
- without a designation that have
- corresponding SR drivers (eg Patch)
-
- * ENABLE SYSTEM EXCLUSIVE
-
- * Match the 'Basic' channel to the
- 'Comm Ch' in the Driver List
-
- * The 'Basic' channel is found in the
- MIDI page
-
- * There is a bug in the WaveStation
- which causes the Patch Bank to be
- dumped instead of Wave Sequences
- when the computer performs a dump
- request. If your instrument has this
- bug, it is necessary to remove the
- MIDI IN from the WaveStation,
- request the dump on the computer
- then manually dump the data from the
- SysX page.
-
- * There is currently no WaveSequence
- editor
-
- * MIDI Parameter must be set to:
- `RECOGNISE & TRANSMIT'
-